Bundling And Trap When Indoor Unit Is Above Outdoor Unit; Bundling And Trap When Indoor Unit Is Below Outdoor Unit; Figure 5-17 Piping/Trap When Indoor Unit Is Above Outdoor Unit; Figure 5-18 Piping/Trap When Indoor Unit Is Below Outdoor Unit - Emerson Liebert SRC18 User Manual

Piping
5.3.2.2

Bundling and Trap when Indoor Unit is above Outdoor Unit

1. Refer to Figure 5-17, and tape the piping, drain hose, and connection cable from down to up.
2. Secure the taped piping along the exterior wall using pipe clamps.
3. Create a trap above the electrical connections cover to prevent water from penetrating electrical
components and wiring.

Figure 5-17 Piping/Trap when indoor unit is above outdoor unit

5.3.2.3

Bundling and Trap when Indoor Unit is below Outdoor Unit

1. Refer to Figure 5-18, and tape and tape the piping, drain hose, and connection cable from down to up.
2. Secure the taped piping along the exterior wall using pipe clamps.
3. Create a trap above the electrical connections cover to prevent water from penetrating electrical
components and wiring.

Figure 5-18 Piping/Trap when indoor unit is below outdoor unit

® ™
Liebert SRC User Manual
Seal small openings
around pipings with a
gum type sealant.
Pipe Clamps
Connecting cable
to Secure Pipe
Against Wal l
Pipings
Drain hose
Trap is required to prevent water
from entering into electrical parts.
Seal a small opening
around the pipings
with gum type sealant .
Trap
Trap
52
Taping
Pipe Clamps
to Secure Pipe
Against Wall