3. Using a screwdriver, connect the wires as shown in Figure 6-8.
• Attach each wire securely to the terminal block.
• Pay attention to the location/connection of the green/yellow ground cable.
Figure 6-8 Indoor-unit terminal block with grounding cable (example only)
6.4.1
Terminal-block Connection for SRC18
NOTE
• Pay special attention to the location of the grounding cable and the cable
restrainer around the other electrical/communication cables when
connecting.
• The terminal block is located behind the drain hose and bundled piping on
these units.
Figure 6-9 SRC18 indoor-unit terminal-block connections
Grounding
Cable
77
Electrical Connections
Terminal Block
Expanded View
Terminal Block
Connecting Cables
Cable Restrainer
Liebert
®
SRC™ User Manual