Selecting Fan Auto; Function Settings; Setting Louver Angle Control; Locking The Display - Emerson Liebert SRC18 User Manual

8.5.13 Selecting Fan Auto

Operates the fan when the outdoor unit is running.
1. Press until
2. Press .
The setting is saved.
3. Press to exit the sub-function set-up.

8.6 Function Settings

8.6.1

Setting Louver Angle Control

Adjusts the angle of airflow.
NOTE
While louver/vane angle is adjusted, commands from the central controller
are delayed for 1 minute.
1. Press repeatedly until
2. Press
to factory-default).
3. Press
4. Repeat Steps 2 and 3 for each louver if needed.
5. When done, Press
The settings are saved.
6. Press to exit the function set-up.
8.6.2

Locking the Display

Locks the display to prevent un-authorized use.
1. Press repeatedly until
2. Press
The display is locked.
3. Press to exit the function set-up.
is displayed in the sub-function section of the display.
flashes in the Function Settings section of the display.
to select the vane number, or All to set all vanes at once
to select the angle, then press
.
flashes in the Function Settings section of the display.
to select , then press
.
.
97
Operation
(STD sets all louvers
®
Liebert SRC™ User Manual