Setting The Minimum Difference Between The Cooling And Heating Setpoints; Setting Current Time; Setting Override Time; Setting Set-Back Temperature - Emerson Liebert SRC18 User Manual

Operation
8.6.3 Setting the Minimum Difference
between the Cooling and Heating Setpoints
1. Press repeatedly until
2. Press
The minimum difference is set.
3. Press to exit the function set-up.
8.6.4

Setting Current Time

1. Press repeatedly until
2. Press
3. Press
4. Press
5. Press
Current time is set.
6. Press to exit the function set-up.
8.6.5

Setting Override Time

1. Press repeatedly until
2. Press
3. Press .
Override interval is set.
4. Press to exit the function set-up.
8.6.6

Setting Set-back Temperature

1. Press repeatedly until
setpoint temperature flashes in the Temperature section.
2. Press
temperature.
3. Press
The set-back setpoint temperatures are set.
4. Press to exit the function set-up.
® ™
Liebert SRC User Manual
flashes in the Function Settings section of the display.
to select the temperature, then press
flashes in the Function Settings section of the display.
to select the current day, then press
to select AM/PM, then press
to select the hour, then press
to select minute, then press
flashes in the Function Settings section of the display.
to select the duration of the override interval from 30 to 240 minutes.
flashes in the Function Settings section of the display, and the Cool
to select the set-back cooling setpoint, then press
to select the set-back heating setpoint, then press
.
to move to AM/PM setting.
to move to hour setting.
to move to minute setting.
.
, to move to the Heat setpoint
.
98