Figure 6-5 Remove Screws From Bottom Panel; Figure 6-6 Remove Bottom Panel; Figure 6-7 Communication-Wires Knockout Panel - Emerson Liebert SRC18 User Manual

Electrical Connections
2. Using a Phillips-head screwdriver, remove the screws from the bottom panel of the indoor unit,
Figure 6-5 and set the bottom panel aside, Figure 6-6.
• The electrical/communication wiring is usually routed through the back/bottom of the indoor unit
through a knockout panel, Figure 6-7.

Figure 6-5 Remove screws from bottom panel

Figure 6-6 Remove bottom panel

Figure 6-7 Communication-wires knockout panel

® ™
Liebert SRC User Manual 76