7. Make sure the tube cutting line is placed upward, Figure 5-32.
Figure 5-32 Correct cutting line placement
8. Use narrow type vinyl tape, and make sure that the section placed in the rear pipe housing is wrapped
sufficiently.
9. Continue to wrap the indoor-unit pipe connection to the outdoor-unit as shown in Figure 5-33.
Figure 5-33 Wrapping connection pipe to indoor-unit pipe
Cutting Line
Gas Pipe
Liquid Pipe
Correct
Connection pipe
Vinyl tape (wide)
Connecting cabl e
Vinyl tape(narrow )
Cutting Line
Incorrect
Indoor unit pipe
Wrap with vinyl tape
Pipe
61
Piping
®
Liebert
SRC™ User Manual