Routing The Drain Hose For Indoor Unit; Figure 5-19 Correct Slope Angle For Drain Hose; Figure 5-20 Incorrect Methods Of Routing Drain Hose - Emerson Liebert SRC18 User Manual

Mini-split cooling system
Table of Contents

Advertisement

5.3.3

Routing the Drain Hose for Indoor Unit

Drain hose is routed from the indoor unit, through the structure (wall) to the outdoors. The hose should
slope at an angle where it is higher at the indoor unit and lower at the outdoor area, letting gravity push
condensation down and out. Figure 5-19 shows the proper drainage slope. Figure 5-20 shows incorrect
methods of routing the drain hose, which cause leakage at the indoor unit.

Figure 5-19 Correct slope angle for drain hose

Figure 5-20 Incorrect methods of routing drain hose

Downward slope
to outdoor
for proper drainage
Indoor
Unit
Incorr ect Drainage Setup
Indoor Uni t
Water
leakage
Indoor Uni t
Water
leakage
Indoor Unit
Water
leakage
Drain Hose
53
Piping
Upward slope
to outdoor
can cause indoor
leaks.
Accumulated
drain water
Air
Waving
Tip of drain hose
dipped in water
Ditch
Less than
2 Inch gap from ground
Piping
®
Liebert
SRC™ User Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Liebert src24Liebert src36Liebert src series

Table of Contents