11
SERVICE WORK ON THE CHASSIS
11.22
Checking the rear sprocket and engine sprocket
Main work
–
Loosen nut
–
Adjust the chain tension by turning adjusting screws
Guideline
Turn adjusting screws
on the left and right. The rear wheel is then correctly aligned.
–
Tighten nut
Guideline
Nut, rear wheel spindle
L00538-10
Finishing work
–
Remove the rear of the motorcycle from the lifting gear. (
–
Check the rear sprocket and engine sprocket for wear.
»
If the rear sprocket and engine sprocket are worn:
–
Replace the rear sprocket or engine sprocket.
400227-01
1
.
2
on the left and right so that distance
1
.
2
on the left and right.
A
is identical
M18x1.5
60 Nm
(44.3 lbf ft)
p. 35)
x
44