Combination Instrument 1/2 - KTM RC 250 R Owner's Manual

6 CONTROLS
6.11

Combination instrument 1/2

3 -1
Overview
Tachometer (16,000 RPM)
Display range: 0~16,000 RPM.
O ver heat warning light
o
Setting range: 6 0~150 C
o
o
Setting unit: 1 C (1 F) .
3 -2
Function, setting instruction
Needle tachometer
Digital tachometer
Display internal
Shift light
Pre-Shift light
Stroke / piston setting
Design and specification are
4 -1
Adjust button function instruction
Press Adjust button one time to switch the
temperature unit between
4 -2
Cycle / Piston / Input signal setting
In the main screen, press down the Select &
Adjust button together for 3 seconds to
the setting screen.
EX. To change the setting to 4
Press the
EX. Now the setting is 2C (2 Stroke).
The digit you could set is flashing now .
C AUTIO N!
Make sure the correct str okes and pistons before setting.
Make sure the input is correct, or the RPM output will
incorrect.
We define the engine with the ignition system ignites every
360 degree as 2-stroke and
system ignites every 720 degree as 4-strok
Some 4-stroke bikes with one single piston are igniting every
360 degree once, so the setting
bike with 2-stroke and one piston engine.
o
(140~302 F) .
Select button
Display range: 0~16,000 RPM
Display range: 0~16,000 RPM
Display unit: 100 RPM
<0.5 second
Setting range: 5,000~16,000 RPM
Setting unit: 100 RPM
Setting range: -500~-5,000 RPM
Setting unit: 100 RPM
2 Stroke: 1, 2, 3, 4 pistons
4 Stroke: 1, 2, 3, 4, 5, 6, 8, 10, 12 pistons
subject to change without notice!
o
C and
stroke.
Adjust button to select the stroke.
You could set the stroke as 2 stroke or 4
stroke.
the engine with the ignition
e.
should be the same as the
Adjust button
Thermometer
Display internal
Over heat warning light
Battery type
Effective temperature range
Meter standard
Meter size
Meter weight
o
F.
enter
be
The RPM shift light
Setting range:5,000~16,000 RPM.
Setting unit:100 RPM.
Pre-shift light
Setting range:
-500~-5,000 RPM.
Setting unit: 100 RPM.
Pre-shift light
(Yellow light)
T hermometer
o
Display range: 0~150 C (32~302
o o
Display unit: 1 C (1 F).
The Digital tachometer
Display range:0~16,000 RPM.
Display range:100 RPM.
o
Display range: 0~150 C
o o
Display unit: 0.1 C 0.1 F
<0.5 second
o
Setting range: 60~150 C 140~302 F
o o
Setting unit: 1 C 1 F
9V-1604, 6LR61
o
-10~+60 C
JIS D 0203 S2
135.7 X 100.7 X 52 mm
Around 240 g
Press the Select button to enter the piston
setting screen.
EX. Now the setting is changed from 2 cycle
to 4 cycle.
EX. To change the setting to 4piston.
Press the Adjust button to select the piston
digit.
EX. Now the setting is 1P (1 piston).
2 Cycle: 1,2,3,4 pistons
4 Cycle: 1,2,3,4,5,6,8,10,12 pistons
The digit you could set is flashing now .
14
Shift light
(Red light)
o
F).
o
0~302 F
o
L00580-01