18
SERVICE WORK ON THE ENGINE
–
Remove screw plug
–
Completely drain the engine oil.
–
Thoroughly clean the parts and sealing surfaces.
–
Mount and tighten the screw plug with the oil screen and the O-rings.
Guideline
Plug, oil screen
L00500-10
–
Mount the oil drain plug
Guideline
Oil drain plug
L00501-10
–
Remove screws
L00555-10
–
Pull oil filter
–
Completely drain the engine oil.
–
Clean the parts and the sealing surface thoroughly.
L00521-11
–
Insert the oil filter into the oil filter housing.
–
Grease the O-ring of the oil filter cover and mount it with the oil filter cover
–
Mount and tighten the screws.
Guideline
Remaining engine screws
L00521-12
–
Remove the oil filler plug
engine oil.
Engine oil
Info
Too little engine oil or poor-quality engine oil results in premature wear to
the engine.
–
Install and tighten the oil filler plug with the O-ring.
L00597-11
2
3
with oil screen
1
with the magnet and seal ring and tighten it.
4
. Take off the oil filter cover with the O-ring.
5
out of the oil filter housing.
7
with the O-ring from the clutch cover and fill up with
0.75 l (0.79 qt.)
and the O-rings.
M32
40 Nm
(29.5 lbf ft)
M12
30 Nm
(22.1 lbf ft)
M6
10 Nm (7.4 lbf ft)
Engine oil (SAE 0W/40) (
67
6
.
p. 94)