Checking The Coolant Overflow Reservoir; Emptying The Coolant Overflow Reservoir; Checking For Chain Dirt; Cleaning The Chain - KTM RC 250 R Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.16

Checking the coolant overflow reservoir

11.17

Emptying the coolant overflow reservoir

11.18

Checking for chain dirt

11.19

Cleaning the chain

Warning
Danger of accidents Oil or grease on the tires reduces their grip.
–
Remove oil and grease with a suitable cleaning material.
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Info
The service life of the chain depends largely on its maintenance.
–
Check the fluid level in the coolant overflow reservoir
» If there is fluid in the coolant overflow reservoir:
–
Empty the coolant overflow reservoir. (
L00510-11
Preparatory work
–
Remove the engine cowl. (
–
Remove the front fairing. (
Main work
–
Remove cable ties
–
Open cover
–
Close the cover.
–
Position the coolant overflow reservoir.
–
Mount the new cable ties.
L00596-10
Finishing work
–
Install the front fairing. (
–
Install the engine cowl. (
–
Check the chain for loose dirt.
» If the chain is very dirty:
–
Clean the chain. (
400678-01
p. 38)
p. 38)
1 .
2
and empty the coolant overflow reservoir.
p. 39)
p. 38)
p. 42)
1
.
p. 42)
42