Preparation; Preparation Process; Step 1: Installing The Software (First Time Only) - IAI GO-2400M-USB User Manual

Preparation

Preparation Process

Step 1
Installing the Software (first time only)
Install the software for configuring and controlling the camera (JAI SDK) on the computer.
Step 2 Connecting Devices
Connect the lens, USB cable, AC adapter, computer, and other devices.
Step 3
Verifying Whether the Camera is Running
Verify whether the camera is ready for use.
Step 4 Configuring Initial Settings for the Camera
• Configure the output format.
• Configure settings related to the exposure and external trigger.
Step 5 Adjusting the Image Quality
• Adjust the gain and white balance.
• Adjust the exposure (shutter).
Step 6 Configuring Various Other Settings
Configure various other settings as necessary.
Step 7
Saving the Settings
Save the current setting configurations in user memory.

Step 1: Installing the Software (first time only)

When using the camera for the first time, install the software for configuring and controlling the camera
(JAI SDK) on the computer.
™ When you install JAI SDK, JAI Camera Control Tool will also be installed.
1
Download the "JAI - Getting Started Guide" and JAI SDK from the JAI website.
URL: http://www.jai.com/en/support/download-jai-software
2
Refer to the "JAI - Getting Started Guide," and install JAI SDK on the computer.
The computer will restart when installation is complete.






— 11 —
GO-2400M-USB / GO-2400C-USB