Unblock The Traffic Meter After The Traffic Limit Is Reached; Manage The Modem Router Remotely - NETGEAR C6250 User Manual

Unblock the Traffic Meter After the Traffic Limit Is Reached

If you configured the traffic meter to disconnect and disable the Internet connection after the
traffic limit is reached, you cannot access the Internet until you unblock the traffic meter.
CAUTION:
If your ISP set a traffic limit, your ISP might charge you for the overage
traffic.
To unblock the traffic meter:

1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. Type http://www.routerlogin.net.
A login window opens.
3. Type admin for the user name and type your password.
If you did not yet personalize your password, type password for the password.
4. Click the OK button.
The BASIC Home page displays.
5. Select ADVANCED > Advanced Setup > Traffic Meter.
The Traffic Meter page displays.
6. In the Traffic Control section, clear the Disconnect and disable the Internet connection
check box.
7. Click the Apply button.
Your settings are saved.

Manage the Modem Router Remotely

The remote management feature lets you update or check the status of your modem router
through a secure HTTP (HTTPS) connection over the Internet. For enhanced security, restrict
access to as few external IP addresses as practical.
Note: Be sure to change the modem router default login password to a secure
password. For more information, see
page 110.
AC1600 WiFi Cable Modem Router
Manage the Modem Router and Monitor Your Network
Change the Password
120
on