NETGEAR C6250 User Manual page 164

Field Description
PFM To enable PFM for the 2.4 GHz band, select one of the following options from the Protected
Management Frames (2.4GHz b/g/n) menu:
• Capable. The 2.4 GHz radio can receive protected management frames but does not
require them.
• Required. The 2.4 GHz radio requires protected management frames and rejects
unprotected management frames.
By default, Off is selected and PFM is disabled for the 2.4 GHz band.
To enable PFM for the 5 GHz band, select one of the following options from the Protected
Management Frames (5GHz a/n/ac) menu:
• Capable. The 5 GHz radio can receive protected management frames but does not
require them.
• Required. The 5 GHz radio requires protected management frames and rejects
unprotected management frames.
By default, Off is selected and PFM is disabled for the 5 GHz band.
WMF To disable WMF for the 2.4 GHz band, clear the Wireless Multicast Forwarding (2.4GHz
b/g/n) check box. By default, this check box is selected and WMF is enabled for the 2.4 GHz
band.
To disable WMF for the 5 GHz band, clear the Wireless Multicast Forwarding (5GHz
a/n/ac) check box. By default, this check box is selected and WMF is enabled for the 5 GHz
band.
ATF To enable ATF for the 2.4 GHz band, select the Enable Airtime Fairness (2.4GHz b/g/n)
check box. By default, this check box is cleared and ATF is disabled for the 2.4 GHz band.
To enable ATF for the 5 GHz band, select the Enable Airtime Fairness (5GHz a/n/ac)
check box. By default, this check box is cleared and ATF is disabled for the 5 GHz band.
8. Click the Apply button.
Your settings are saved.
AC1600 WiFi Cable Modem Router
Manage the Advanced WiFi Network Settings
164