Configure Wep Legacy Wifi Security For The Guest Wifi Network - NETGEAR C6250 User Manual

Configure WEP Legacy WiFi Security for the Guest WiFi
Network
Wired Equivalent Privacy (WEP) security is a legacy authentication and data encryption
mode that is superseded by WPA-PSK and WPA2-PSK. WEP supports speeds of up to
54 Mbps (the modem router is capable of speeds of up to 300 Mbps).
IMPORTANT:
The WiFi mode of the guest WiFi network depends on the WiFi
mode of the main WiFi network. For you to be able to configure
WEP in the guest WiFi network, first configure the mode for the
main WiFi network as Up to 54 Mbps. For information about
configuring the WiFi mode, see
WiFi Security of the Main Network
To configure WEP security for the guest WiFi network:

1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. Type http://www.routerlogin.net.
A login window opens.
3. Type admin for the user name and type your password.
If you did not yet personalize your password, type password for the password.
4. Click the OK button.
The BASIC Home page displays.
5. Select BASIC > Guest Network.
The Guest Network Settings page displays.
6. In the Security Options section, select the WEP radio button.
AC1600 WiFi Cable Modem Router
Manage the Basic WiFi Settings and
on page 36.
These options display only if you
select the Up to 54 Mbps mode
for the main WiFi network.
Manage the Basic WiFi Network Settings
52