Disable Or Remove A Port Triggering Rule - NETGEAR C6250 User Manual

For more information about the settings, see
10. Click the Apply button.
Your settings are saved. The changed rule displays in the Port Triggering Portmap Table
on the Port Forwarding / Port Triggering page.

Disable or Remove a Port Triggering Rule

You can disable or remove a port triggering rule that you no longer need.
To disable or remove a port triggering rule:

1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. Type http://www.routerlogin.net.
A login window opens.
3. Type admin for the user name and type your password.
If you did not yet personalize your password, type password for the password.
4. Click the OK button.
The BASIC Home page displays.
5. Select ADVANCED > Advanced Setup > Port Forwarding / Port Triggering.
The Port Forwarding / Port Triggering page displays.
6. Select the Port Triggering radio button.
The following figure shows two port triggering rules.
AC1600 WiFi Cable Modem Router
Manage Port Forwarding and Port Triggering
176
Add a Port Triggering Rule on page 173.