NETGEAR C6250 User Manual page 38

Field Description
Name (SSID) The SSID is the WiFi network name. If you did not change the SSID, the default SSID
displays. The default SSID is also printed on the product label (see
page 23).
Note: NETGEAR recommends that you do not change the default SSID. If you must
change the SSID, enter a 32-character (maximum), case-sensitive name in this field.
Channel From the Channel menu, select Auto for automatic channel selection or select an
individual channel. The default selection is Auto and the channel that is in use is stated
next to the menu.
Note: Do not change the channel unless you experience interference (shown by lost
connections or slow data transfers). If this situation occurs, experiment with different
channels to see which one is the best.
Note: If you use multiple WiFi access points (APs), reduce interference by selecting
different channels for adjacent APs. NETGEAR recommends a channel spacing of four
channels between adjacent APs (for example, use Channels 1 and 5, or 6 and 10).
Mode From the Mode menu, select one of the following modes:
• Up to 54 Mbps. Legacy mode. This mode allows 802.11n, 802.11g, and 802.11b
devices to join the network but limits 802.11n devices to functioning at up to 54 Mbps.
• Up to 145 Mbps. Neighbor-friendly mode for reduced interference with neighboring
WiFi networks. This mode allows 802.11n, 802.11g, and 802.11b devices to join the
network but limits 802.11n devices to functioning at up to 145 Mbps. This mode is the
default mode.
• Up to 300 Mbps. Performance mode. This mode allows 802.11n, 802.11g, and
802.11b devices to join the network and allows 802.11n devices to function at up to
300 Mbps.
Note: WEP and WPA-PSK security support speeds of up to 54 Mbps. Even if your devices
are capable of a higher speed, WEP and WPA-PSK security limit their speed to 54 Mbps.
AC1600 WiFi Cable Modem Router
Manage the Basic WiFi Network Settings
38
Product Label on