NETGEAR C6250 User Manual page 18

(assigning IP addresses to devices on the network). This turns the modem router into a
bridged modem.
Note: If the modem router functions as a cable modem only (that is, as a
bridged modem or in bridge mode), the modem router's WiFi radios
are turned off.
To cable your modem router to a gateway or router and change the router mode:

1. Connect a coaxial cable.
Use the coaxial cable that your cable company provides to connect the cable port on the
modem router to a cable wall outlet or a line splitter.
2. Connect the power adapter to the modem router and plug the power adapter into an
electrical outlet.
The Power LED lights green.
3. On your computer or wireless device, find and select the WiFi network.
The WiFi network name is on the product label.
4. Join the WiFi network and enter the WiFi password.
The password is on the product label.
Your wireless device connects to the WiFi network.
5. Launch an Internet browser.
6. Type http://www.routerlogin.net.
A login window opens.
7. Type admin for the user name and type your password.
If you did not yet personalize your password, type password for the password.
8. Click the OK button.
The BASIC Home page displays.
9. Select ADVANCED > Administration > Router Mode.
The Router Mode page displays.
10. Select the No radio button.
By default, the Yes radio button is selected.
AC1600 WiFi Cable Modem Router
Hardware Overview and Setup
18