NETGEAR C6250 User Manual page 31

The following table describes the fields on the Internet Setup page.
Field
Account Name (If Required)
Domain Name (If Required)
Internet IP Address
Get Dynamically from ISP
Use Static IP Address
Domain Name Server (DNS) Address
The DNS server is used to look up site addresses based on their names.
Get Dynamically from ISP
Use These DNS Servers
7. If you changed the settings, click the Apply button.
Your settings are saved.
AC1600 WiFi Cable Modem Router
Description
Enter the account name provided by your cable service provider. This
name might also be called the host name. If you do not know or did not
receive an account name, leave the default name, which is the model
number of the modem router.
Enter the domain name provided by your cable service provider. If you do
not know the domain name, leave this field blank.
Your cable service provider uses DHCP to assign your IP address. Your
cable service provider automatically assigns these addresses.
Enter the IP address, IP subnet mask, and gateway IP address that your
cable service provider assigned to you. The gateway is the provider
gateway to which your modem router connects.
Your cable service provider uses DHCP to assign your DNS servers. Your
cable service provider automatically assigns this address.
If you know that your cable service provider does not automatically transmit
DNS addresses to the modem router during login, select this option, and
enter the IP address of your cable service provider primary DNS server. If
secondary and tertiary DNS server addresses are available, enter these
also.
Customize the Internet Settings
31