NETGEAR C6250 User Manual page 121

To set up remote management:

1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. Type http://www.routerlogin.net.
A login window opens.
3. Type admin for the user name and type your password.
If you did not yet personalize your password, type password for the password.
4. Click the OK button.
The BASIC Home page displays.
5. Select ADVANCED > Advanced Setup > Remote Management.
The Remote Management Address field shows the IP address that is assigned to the
modem router and the secure port number, both of which are required to log in to the
modem router from a remote location.
6. Select the Turn Remote Management On check box.
7. Specify the external IP address or addresses from which the modem router can be
managed remotely:
• To specify access for a single IP address on the Internet, do the following:
a. Select the Only This Computer radio button.
b. Enter the IP address from which access is allowed.
• To specify access for a range of IP addresses on the Internet, do the following:
a. Select IP Address Range radio button.
b. In the From field, enter the start IP address of the range from which access is
allowed.
c. In the To field, enter the end IP address of the range from which access is
allowed.
AC1600 WiFi Cable Modem Router
Manage the Modem Router and Monitor Your Network
121