Technical And Environmental Specifications - NETGEAR C6250 User Manual

Table 6. Factory default settings (continued)
Feature
WPS
1. Maximum WiFi signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network conditions
and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower
actual data throughput rate.

Technical and Environmental Specifications

Table 7. Modem router specifications
Feature
Data and routing protocols
Power adapter
Dimensions and weight
WAN port
Ethernet ports
USB ports
WiFi
WiFi channels
Maximum computers per WiFi
network
Operating frequency ranges
AC1600 WiFi Cable Modem Router
WPS capability
Modem router's PIN
Keep Existing Wireless Settings
Description
TCP/IP, DHCP server and client, DNS relay, NAT (many-to-one), TFTP client,
VPN pass-through, DNS, UPnP
• North America (input): 120V, 60 Hz, 1A input
• North America (output): 12 VDC @ 2.5A, 30W maximum output
• 7.68 by 7.79 by 2.52 in. (195 by 198 by 64 mm)
• 1.2 lb (0.54 kg)
One coaxial cable connector
DOCSIS 3.0. backward compatible with DOCSIS 2.0, 1.1, and 1.0
Two 10/100/1000BASE-T, RJ-45 autosensing ports
One USB 2.0 ports
• 2.4 GHz band: Up to 300 Mbps or 802.11b/g/n devices
• 5 GHz band: Up to 1.3 Gbps for 802.11a/n/ac devices
• 2.4 GHz band: Auto or a single channel from 1 through 11
• 5 GHz band: 36, 40, 44, 48, 149, 153, 157, 161 or 165
Limited by the amount of WiFi network traffic generated by each node
• 2.4 GHz band: 2.412–2.462 GHz
• 5 GHz band: 5.18–5.24 + 5.745–5.825 GHz
Factory Default Settings and Specifications
Default Settings
Enabled
Enabled; see the web management interface (path
ADVANCED > Advanced Setup > Wireless
Settings)
Enabled (2.4 GHz and 5 GHz bands)
197