Enable FTP Access Within Your Network
File Transfer Protocol (FTP) lets you download (receive) and upload (send) large files faster.
Note:
For information about using FTP to access a storage device over the
Internet, see
To enable FTP access within your network:
1.
Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2.
Type http://www.routerlogin.net.
A login window opens.
3.
Type admin for the user name and type your password.
If you did not yet personalize your password, type password for the password.
4.
Click the OK button.
The BASIC Home page displays.
5.
Select ADVANCED > USB Storage > Advanced Settings.
The previous figure shows a USB device attached to the modem router.
6.
Select the FTP check box.
AC1600 WiFi Cable Modem Router
Chapter 10, Access Storage Devices Through the
Share a Storage Device
128
Internet.