Manage The Ipv6 Lan Settings - NETGEAR C6250 User Manual

The BASIC Home page displays.
5. Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
6. In the Address Reservation Table, select the radio button next to the reserved address that
you want to remove.
7. Click the Delete button.
The reserved address is removed from the Address Reservation Table.
8. Click the Apply button.
Your settings are saved.

Manage the IPv6 LAN Settings

You can manage the IPv6 LAN settings only if the cable Internet provider assigns an IPv6
Internet address to the modem router. If the cable Internet provider assigns only an IPv4
Internet address to the modem router, you can skip this section.
If the cable Internet provider assign an IPv6 IP address to the modem router, you can specify
how the modem router must assign IPv6 addresses to the devices on your home network
(the LAN) and you can enable or disable the IPv6 firewall.
To manage the IPv6 LAN settings:

1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. Type http://www.routerlogin.net.
A login window opens.
3. Type admin for the user name and type your password.
If you did not yet personalize your password, type password for the password.
4. Click the OK button.
The BASIC Home page displays.
5. Select ADVANCED > Advanced Setup > IPv6.
AC1600 WiFi Cable Modem Router
Manage the WAN and LAN Network Settings
88