NETGEAR C6250 User Manual page 168

A login window opens.
4. Type admin for the user name and type your password.
If you did not yet personalize your password, type password for the password.
5. Click the OK button.
The BASIC Home page displays.
6. Select ADVANCED > Advanced Setup > Port Forwarding / Port Triggering.
The Port Forwarding / Port Triggering page displays.
7. Make sure that the Port Forwarding radio button is selected.
8. Click the Add Custom Service button.
9. Specify a new port forwarding rule with a custom service or application as described in the
following table.
Field
Service Name
Service Type
External Starting Port
External Ending Port
Internal Starting Port
Internal Ending Port
AC1600 WiFi Cable Modem Router
Description
Enter the name of the custom service or application.
Select the protocol (TCP or UDP) that is associated with the service or application.
If you are unsure, select TCP/UDP.
Enter the external start port number that the service or application uses.
Enter the external end port number that the service or application uses.
Specify the internal start port by one of these methods:
• Leave the Use the same port range for Internal port check box selected.
• Clear the Use the same port range for Internal port check box and enter
the internal start port number that the service or application uses.
Specify the internal end port by one of these methods:
• Leave the Use the same port range for Internal port check box selected.
• Clear the Use the same port range for Internal port check box and enter
the internal end port number that the service or application uses.
Manage Port Forwarding and Port Triggering
168