NETGEAR C6250 User Manual page 174

8. Specify a new port triggering rule with a custom service or application as described in the
following table.
Field
Service Name
Service User
Service Type
Triggering Starting Port
Triggering Ending Port
Inbound Connection
Starting Port
Ending Port
9. Click the Apply button.
Your settings are saved. The rule is added to the Port Triggering Portmap Table on the
Port Forwarding / Port Triggering page and is enabled.
AC1600 WiFi Cable Modem Router
Description
Enter the name of the custom service or application.
From the Service User menu, select Any, or select Single address and enter
the IP address of one computer:
• Any. This is the default setting and allows any computer on the Internet to
use this service.
• Single address. Restricts the service to a particular computer.
Select the protocol (TCP or UDP) that is associated with the service or
application.
Enter the number of the outbound traffic start port that must open the inbound
ports.
Enter the number of the outbound traffic end port that must open the inbound
ports.
Enter the start port number for the inbound connection.
Enter the end port number for the inbound connection.
Manage Port Forwarding and Port Triggering
174