IBM Flex System p260 Installation And Service Manual page 442

2D29-4010 • 2D29-4100
2D29-4010
Explanation: Configuration error, incorrect connection between cascaded enclosures. Use MAP3142 to determine
resolution.
Response:
2D29-4020
Explanation: Configuration error, connections exceed IOA design limits. Use MAP3143 to determine resolution.
Response:
2D29-4030
Explanation: Configuration error, incorrect multipath connection. Use MAP3144 to determine resolution.
Response:
2D29-4040
Explanation: Configuration error, incomplete multipath connection between controller and enclosure detected. Use
MAP3144 to determine resolution.
Response:
2D29-4041
Explanation: Configuration error, incomplete multipath connection between enclosure and device detected. Use
MAP3146 to determine resolution.
Response:
2D29-4050
Explanation: Attached enclosure does not support required multipath function. Use MAP3148 to determine
resolution.
Response:
2D29-4060
Explanation: Multipath redundancy level got worse. Use MAP3153 to determine resolution.
Response:
2D29-4100
Explanation: Device bus fabric error. Use MAP3152 to determine resolution.
Response:
430
Power Systems: IBM Flex System p260 and p460 Compute Nodes Installation and Service Guide