IBM Flex System p260 Installation And Service Manual page 189

Hide thumbs Also See for Flex System p260:
Table of Contents

Advertisement

B7005209 • B7005304
B7005209
Explanation: Informational system log entry only.
Response: No corrective action is required.
B7005219
Explanation: Informational system log entry only.
Response: No corrective action is required.
B7005300
Explanation: System firmware detected a failure while partitioning resources. The platform partitioning code
encountered an error.
Response: Check the Management Module event log for error codes; then, take the actions associated with those
error codes.
B7005301
Explanation: User intervention required. The system detected a problem with the partition configuration.
Response: Use the management console to reallocate the system resources.
B7005302
Explanation: An unsupported Preferred Operating System was detected.
The Preferred Operating System specified is not supported. The IPL will not continue.
Response: Work with IBM support to select a supported Preferred Operating System; then, re-IPL the system.
B7005303
Explanation: An unsupported Preferred Operating System was detected.
The Preferred Operating System specified is not supported. The IPL will continue.
Response: Work with IBM support to select a supported Preferred Operating System; then, re-IPL the system.
B7005304
Explanation: The number of available World Wide Port Names (WWPN) is low.
Response: Refer to https://www-912.ibm.com/supporthome.nsf/document/51455410
177
Chapter 8. Troubleshooting

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flex system p460

Table of Contents