IBM Flex System p260 Installation And Service Manual page 135

11002674
Explanation: Expansion server pGood fault at standby.
Response:
1. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
2. Replace the expansion system-board (Un-P2) assembly, as described in Removing the expansion unit.
11002675
Explanation: 1.1 Reg_CPU0_P5IO2C_Vio_pGood fault.
Response:
1. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
2. Replace the system board. If there is more than one system board, use the location code in the SRC to identify
which system board to replace.
11002676
Explanation: VTTA/B pGood fault.
Response:
1. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
2. Replace the system board. If there is more than one system board, use the location code in the SRC to identify
which system board to replace.
11002678
Explanation: PROC_Vmem_controller_pGood 1.0V. fault
Response:
1. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
2. Replace the system board. If there is more than one system board, use the location code in the SRC to identify
which system board to replace.
11002679
Explanation: Vmem_controller_pGood 1.5V reg. fault
Response:
1. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
2. Replace the system board. If there is more than one system board, use the location code in the SRC to identify
which system board to replace.
11002674 • 11002679
Chapter 8. Troubleshooting
123