IBM Flex System p260 Installation And Service Manual page 272

C2008104 • C200813F
C2008104
Explanation: Loading data structures into main store
Response:
1. Go to Recovering the system firmware.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
C2008110
Explanation: Initializing event paths
Response:
1. Go to Recovering the system firmware.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
C2008120
Explanation: Starting processor(s)
Response:
1. Go to Recovering the system firmware.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
C2008130
Explanation: Begin associate of system ports
Response:
1. Go to Recovering the system firmware.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
C2008138
Explanation: Associating system ports to the partition
Response:
1. Go to Recovering the system firmware.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
C200813F
Explanation: End associate of system ports
Response:
1. Go to Recovering the system firmware.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
260
Power Systems: IBM Flex System p260 and p460 Compute Nodes Installation and Service Guide