IBM Flex System p260 Installation And Service Manual page 192

B7006911 • B7006954
B7006911
Explanation: Platform LIC unable to find or retrieve VPD LID file.
Response: Check for server firmware updates; then, install the updates if available.
B7006912
Explanation: Platform LIC unable to find or retrieve VPD LID file.
Response: Check for server firmware updates; then, install the updates if available.
B7006944
Explanation: Informational system log entry only.
Response: No corrective action is required.
B7006950
Explanation: A platform dump has occurred.
Response:
1. Collect the platform dump information.
2. Go to Isolating firmware problems.
B7006951
Explanation: An error occurred because a partition needed more NVRAM than was available.
Response: Use the management console to delete one or more partitions.
B7006952
Explanation: Informational system log entry only.
Response: No corrective action is required.
B7006953
Explanation: PHYP NVRAM is unavailable after a service processor reset and reload.
Response: Go to Isolating firmware problems.
B7006954
Explanation: Informational system log entry only.
Response: No corrective action is required.
180
Power Systems: IBM Flex System p260 and p460 Compute Nodes Installation and Service Guide