IBM Flex System p260 Installation And Service Manual page 353

2607-701 • 2607-706
2607-701
Explanation: Error Log Analysis indicates that the adapter self-test failed for the Fibre Channel adapter card. Go to
Performing the checkout procedure.
Response:
Failing Item:
v FFC_2607
2607-703
Explanation: Error Log Analysis indicates that an unknown adapter error has occurred for the Fibre Channel
adapter card. Go to Performing the checkout procedure.
Response:
Failing Item:
v FFC_2607
2607-704
Explanation: Error Log Analysis indicates that an adapter error has occurred for the Fibre Channel adapter card. Go
to Performing the checkout procedure.
Response:
Failing Item:
v FFC_2607
2607-705
Explanation: Error Log Analysis indicates that a parity error has been detected for the Fibre Channel adapter card.
The adapter must be replaced immediately. Failure to do so could result in data being read or written incorrectly.
Response:
Failing Item:
v FFC_2607
2607-706
Explanation: Error Log Analysis indicates that a fatal hardware error has occurred for the Fibre Channel adapter
card.
This adapter was successfully taken off-line. It will remain off-line until reconfigured or the system is rebooted. This
adapter must be replaced and not brought back on-line. Failure to adhere to this action could result in data being
read or written incorrectly or in the loss of data.
Response:
Failing Item:
v FFC_2607
341
Chapter 8. Troubleshooting