D1Xx1Yyy Service Processor Dump Status Codes - IBM Flex System p260 Installation And Service Manual

D1001XXX • D1011XXX

D1xx1yyy service processor dump status codes:

D1xx1yyy service processor dump status codes indicate the cage or node ID that the dump component is
processing, the node from which the hardware data is collected, and a counter that increments each time
that the dump processor stores 4K of dump data.
Service processor dump status codes use the format, D1xx1yyy, where xx and yyy can be any number or
letter.
The xx part of the code indicates the cage or node ID that the dump component is processing. The node
varies depending on the node from which the hardware data is collected. The node is 0xFF when
collecting the mainstore memory data.
The yyy part of the code is a counter that increments each time that the dump processor stores 4K of
dump data.
The D1xx1yyy dump status codes below are the progress codes that might be displayed during the
power-on self-test (POST), along with suggested actions to take if the system hangs on the progress code.
Only when you experience a hang condition should you take any of the actions described for a progress
code.
If the system hangs on a progress code, follow the suggested actions in the order in which they are listed
until the problem is solved. If an action solves the problem, you can stop performing the remaining
actions. See Chapter 7, "Parts listing for IBM Flex System p260 and p460 Compute Nodes," on page 97 to
determine which components are CRUs and which components are FRUs.
D1001XXX
Explanation: Dump error data
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
D1011XXX
Explanation: Dump dump header
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
289
Chapter 8. Troubleshooting