IBM Flex System p260 Installation And Service Manual page 173

B2008115 • B200813A
B2008115
Explanation: During the startup of a partition, there was a low level partition-to-partition communication failure.
Response: Check for server firmware updates; then, install the updates if available.
B2008117
Explanation: During the startup of a partition, the partition did not start up due to a system firmware error.
Response: Check for server firmware updates; then, install the updates if available.
B2008121
Explanation: During the startup of a partition, the partition did not start up due to a system firmware error.
Response: Go to Isolating firmware problems.
B2008123
Explanation: During the startup of a partition, the partition did not start up due to a system firmware error.
Response: Go to Isolating firmware problems.
B2008125
Explanation: During the startup of a partition, the partition did not start up due to a system firmware error.
Response: Go to Isolating firmware problems.
B2008127
Explanation: During the startup of a partition, the partition did not start up due to a system firmware error.
Response: Go to Isolating firmware problems.
B2008129
Explanation: During the startup of a partition, the partition did not start up due to a system firmware error.
Response: Go to Isolating firmware problems.
B200813A
Explanation: There was a problem establishing a console.
Response: Go to Isolating firmware problems.
161
Chapter 8. Troubleshooting