IBM Flex System p260 Installation And Service Manual page 233

BA180014
Explanation: MSI software error
Response:
1. Reboot the server.
2. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA180020
Explanation: No response was received from a slot during PCI probing.
Response:
1. Reboot the server.
2. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA180099
Explanation: PCI probe error; the bridge is in a freeze state, and the slot is in a reset state
Response:
1. Reseat the PCI adapter card.
2. Check for adapter firmware updates; install the updates if available.
3. Check for server firmware updates; install the updates if available.
4. Replace the PCI adapter card.
5. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA180100
Explanation: The FDDI adapter Fcode driver is not supported on this server.
Response: IBM may produce a compatible driver in the future, but does not guarantee one.
BA180101
Explanation: Stack underflow from fibre-channel adapter
Response:
1. Reboot the server.
2. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA180014 • BA180101
Chapter 8. Troubleshooting
221