Setting By Country (Function Code: 74); Setting By Country - Brother DCP-1510 Service Manual

1.3.20 Setting by country (function code: 74)

<Function>
This function is used to customize the machine according to language, function settings, and
worker switch settings.
<Operating Procedure>
(1) Ten-key pad models
Press the [7] and [4] buttons in this order in the initial state of maintenance mode.
Non-ten-key pad models
Press the [
[OK] button.
(2) The country code currently set is displayed on the LCD. Enter the country code you want
to set.
(3) Press the [Start] button. The new setting is saved, and "PARAMETER INIT" is displayed
on the LCD. Then the machine returns to the initial state of maintenance mode.
(4) When the [Stop/Exit] button is pressed during setting, the machine returns to the initial
state of maintenance mode without saving any changes that have been made.
Note:
• If there is no entry for one minute or longer, the machine returns to the initial state of
maintenance mode automatically, regardless of the display status.
Setting by country code list
Country
German German
Austria
UK
France
Belgium
Netherlands
Switzerland
Italy
Vietnam
China
Taiwan
Turkey
Indonesia
Argentina
The above information is as of May 2013. Please confirm the latest firmware information
which is available from your local Brother Customer Service.
] or [ ] button to display "MAINTENANCE 74" on the LCD and press the
DCP- DCP- DCP-
1510 1511 1512
0053 - 0153
(0003) (0103)
0053 - 0153
(0014) (0114)
1004 - 1104
1004 - 1105
1008 - -
1004 - -
1004 - -
1004 - 1105
- 0019 -
- - -
0023 - -
- 0025 -
0040 - -
- - 0136
DCP- MFC- MFC-
1518 1810 1811
- 0053
(0003)
- 0053
(0014)
- 0004
- 0005
- 0008
- 0009
- 0010
- 0016
- - 0019
0020 -
- -
- - 0025
- 0040
- -
4-29
MFC- MFC-
1813 1815
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- -
- 0020 -
- - 0123
- 0125
- - 0140
- - 0136
Confidential
MFC-
1818
-
-
-
-
-
-
-
-
-
0120
-
-
-
-