Print White Level / Black Level Data For Document Scanning Compensation (Function Code: 05); Print White Level / Black Level Data For Document Scanning - Brother DCP-1510 Service Manual

1.3.2 Print white level / black level data for document scanning compensation
(function code: 05)
<Function>
This function is used to print the contrast level data for document scanning compensation.
<Operating Procedure>
Note:
• Be sure not to perform this operating procedure immediately after the power is turned ON,
but after performing the document scanning operation at least once. The machine initializes
the contrast level data and obtains the standard value for document scanning compensation
at the start of scanning the document. Therefore, this function cannot be operated without
performing a document scanning operation.
The print result varies depending on whether color scanning or monochrome scanning is
performed immediately before this operating procedure. Check the contrast level data you
want to print and then implement the procedure below.
(1) For monochrome scanning, make a monochrome copy of the document. For color
scanning, scan the document in color mode.
(2) Ten-key pad models
Press the [0] and [5] buttons in this order in the initial state of maintenance mode.
Non-ten-key pad models
Press the [
[OK] button.
(3) "PRINTING" is displayed on the LCD, and the contrast level data for document scanning
compensation is printed.
Note:
• When there is no paper in the paper tray, printing is cancelled.
(4) When printing is completed, the machine returns to the initial state of maintenance mode.
] or [ ] button to display "MAINTENANCE 05" on the LCD and press the
4-5
Confidential