Chapter 4 Service Functions; Maintenance Mode; How To Enter Maintenance Mode; Method Of Entering End-User Accessible Maintenance Mode - Brother DCP-1510 Service Manual

CHAPTER 4 SERVICE FUNCTIONS

1. MAINTENANCE MODE

Maintenance mode is exclusively designed for checking, setting and adjusting the machine
using the buttons on the control panel.
Using maintenance mode functions, you can conduct operational checks of sensors or test
printing, display the log information or error codes, and change the worker switches (WSW)
etc.
1.1

How to Enter Maintenance Mode

1.1.1 Method of entering end-user accessible maintenance mode

The maintenance mode functions should only be accessed by service personnel. However,
end users are allowed to use some of these functions under the guidance of service personnel
over the phone. End users can only use the functions shaded in the table
Maintenance Mode Functions
80, 82, 87 and 91).
<Operating Procedure>
(1) While the machine is in the ready state, press the [Menu], [Start], and [Menu] buttons in
this order. "0" is displayed on the LCD.
(2) Ten-key pad models
Use the ten-key pad to enter the maintenance mode function code to be executed.
Non-ten-key pad models
Press the [
executed on the LCD and press the [OK] button.
(3) Enter the maintenance mode function code to be executed.
(4) Each time the maintenance mode function is completed, the machine returns to the
ready state automatically.
Note:
• To return to the ready state of maintenance mode during the operation, press the [Stop]
button.
(function codes
] or [ ] button to display the maintenance mode function code to be
06, 09, 10, 11, 12, 25, 43, 45, 52, 53, 54, 77,
4-1
1.2 List of
Confidential