Side Cover R - Brother DCP-1510 Service Manual

7.2

Side cover R

(1) Remove the two taptite bind B M4x12 screws.
(2) Remove the three boss bushings of the side cover R. Pull out the three tabs and release
the four hooks on the bottom. Disconnect the speaker harness from the main PCB ASSY
(only for models with ADF unit), and remove the side cover R from the machine.
(3) Remove the speaker hold spring from the side cover R (only for models with ADF unit).
(4) Remove the speaker from the side cover R, and pull out the speaker harness from the hole
of the side cover R (only for models with ADF unit).
(5) Remove the taptite bind B M4x12 screw, and release the hook to remove the dress cover R
from the side cover R.
Dress cover R
Hook
Taptite bind
B M4x12
Boss
bushing
Tab
Hooks
Harness routing: Refer to
/ fuser unit".
(6) Close the top cover ASSY and the document scanner unit.
Taptite bind B M4x12
Boss
bushings
Side cover R
Fig. 2-5
"1. Frame R / main PCB ASSY / low voltage power supply PCB unit
Speaker harness
(only for models with ADF unit)
Tabs
Speaker harness
(only for models
with ADF unit)
2-14
Taptite bind
B M4x12
Speaker hold spring
(only for models with
ADF unit)
Speaker
(only for
models with
ADF unit)
Hole
Confidential