Brother DCP-1510 Service Manual page 56

Error code 9601
Wrong Paper Type
Reload with A4, Letter, Legal or Folio paper, and press Start.
The paper feed sensor detected that the paper width was narrower than A4 size.
Error code 9608
Wrong Paper Type
Reload with A4, Letter, Legal or Folio paper, and press Start.
The paper feed sensor detected that the paper length was shorter than the specified size.
<User Check>
• Set A4/letter size paper or bigger.
Step
Paper feed actuator L/R coming
1
off
Paper feed sensor failure
2
3 Main PCB failure
Error code A200
Document Jam
Clear the scanner jam, then press the Stop Key.
The document scanning position sensor detected that the document length was 90 cm or
more while scanning a document.
<User Check>
• Use A4 size paper or smaller.
• Remove the jammed document.
Step
Document scanning position
1 actuator caught in sections of
the machine
Document scanning position
2
sensor failure
3 Main PCB failure
Cause
Reattach the paper feed actuator L/R.
Replace the paper feed/paper printing position
sensor PCB ASSY.
Replace the main PCB ASSY.
Cause
Reattach the document scanning position
actuator.
Replace the document scanning position
sensor PCB ASSY.
Replace the main PCB ASSY.
1-39
Remedy
Remedy
Confidential