Low Voltage Power Supply Pcb Unit - Brother DCP-1510 Service Manual

7.6

Low voltage power supply PCB unit

Note:
• Do not pull out the low voltage PCB harness forcefully, to avoid it coming into contact
with the high voltage power supply PCB ASSY. Remove the high voltage power supply
PCB ASSY first to avoid it getting damaged.
(1) Remove the four taptite bind B M4x12 screws, the two taptite cup S M3x8 SR screws, and
the screw pan (S/P washer) M3.5x6 screw to remove the low voltage shield plate and the
low voltage PCB insulation sheet.
Low voltage shield plate
Taptite cup S M3x8 SR
Taptite bind B M4x12
High voltage power
supply PCB ASSY
Fig. 2-22
2-26
Low voltage PCB
insulation sheet
Taptite cup S M3x8 SR
Screw pan (S/P washer) M3.5x6
Confidential