Entering Adjusted Value Of Laser Unit - Brother DCP-1510 Service Manual

2.1

Entering Adjusted Value of Laser Unit

<Operating Procedure>
(1) Connect the computer to the machine with the USB cable.
(2) Double-click the "BrUsbsn.exe" file that was copied to
the temporary folder to start it.
The "BrUsbSn" window shown on the right appears.
(3) In the "Product Category" field, select "2 Mono-Laser".
(4) Select "2013 MFC1".
(5) In the "Port" field on the "BrUsbSn" screen, select the
port number assigned to the "Brother Maintenance USB
Printer".
If the port number is unknown, follow the steps below to
check it.
1) Click "Start", "Settings", and "Printers and Faxes". The
"Printers and Faxes" window appears.
2) Right-click the "Brother Maintenance USB Printer"
icon.
3) Click "Properties". The "Brother Maintenance USB
Printer Properties" window appears.
4) Click the "Ports" tab. The Brother Maintenance USB
Printer port number is displayed.
(6) Enter the last five digits on the laser serial number label in the "Scanner Video Clk" field.
Laser serial number label
0 5 4 8 4 8
Enter the last five digits.
(7) Click the [OK] button. Confirmation screen appears. Check that the serial number and
the adjusted value of the laser unit are correct and click the [Yes] button. The adjusted
value of the laser unit is written to the machine.
(8) Turn OFF the power switch of the machine.
Fig. 3-2
3-7
Confidential