7.12 Handset holder (only for models with handset)
(1) Remove the three taptite bind B M4x12 screws.
(2) Release the hook PCB harness from the securing fixtures of the side cover L. Release the
four hooks to remove the handset holder from the side cover L.
(3) Remove the taptite cup B M3x8 screw. Release the four hooks to remove the lower
handset holder from the upper handset holder.
(4) Release the hook to remove the hook PCB ASSY from the lower handset holder, and
release the hook PCB harness from the securing fixtures.
(5) Release the two hooks of the hook actuator to remove it from the hook PCB ASSY.
Upper handset holder
Hook actuator
Hook
Hook PCB ASSY
Hook PCB harness
Harness routing: Refer to
L)"
and
"7. Hook PCB harness (only for models with handset) (lower handset
Side cover L
Hooks
Hook
Hook
Hooks
Hook
Taptite cup B M3x8
Lower handset holder
"6. Hook PCB harness (only for models with handset) (side cover
Hook
Hooks
Fig. 2-31
2-34
Taptite bind B
M4x12
Hooks
holder)".
Confidential