Brother DCP-1510 Service Manual page 178

LCD
*2
MACERR_01:0000
*3
KTN_CH:0000
*3
DRUM_CH:0000
KTN_PG1:00000000
KTN_PG2:00000000
ADF_PG:00000000
FB_PG:000000
ADF_JAM:000000
*4
COMERR :
KDEV_BIAS:***V
*4
ENGERR01:000000
HODN_ER:0000
FUSR_ER:0000
MTLK_ER:00000000
DEVSTATUS__01:00
*1
The serial number can be changed according to the steps below.
1) Ten-key pad models
While the serial number is displayed, press the [9], [4], [7], and [5] buttons in this
order.
Non-ten-key pad models
Press the [ ] or [
enter. Enter the "4", "7" and "5" in this order by using the [
similarly.
2) The cursor appears on the first digit of the serial number and the machine enters edit
mode.
Ten-key pad models
Use the ten-key pad to enter the first digit of the serial number. The cursor moves to
the second digit. Then enter the second digit to the 15th digit similarly.
<Entry method of alphanumeric characters>
See the right table and press the
corresponding key until the desired
character is displayed.
Machine error log (past ten errors)
The number of times that the toner cartridge has been replaced
The number of times that the drum unit has been replaced
Pages printed with the current toner cartridge
Pages printed with the previous toner cartridge
The number of pages scanned from ADF
The number of pages scanned on the document scanner unit
The number of jams that occurred in scanning from ADF
Latest communication error log (past three errors)
Black developing bias voltage value
Engine error log (past ten errors)
The number of discharge errors
The number of fuser unit errors
The number of polygon motor lock errors
*5
Log for design analysis
] button to display "9" on the LCD and press the [OK] button to
4-34
Description
], [
Ten-key pad Assigned characters
2 → A → B → C
2
3 → D → E → F
3
4 → G → H → I
4
5 → J → K → L
5
6 → M → N → O
6
7 → P → Q → R → S
7
8 → T → U → V
8
9 → W → X → Y → Z
9
] and [OK] buttons
Confidential