Brother DCP-1510 Service Manual page 38

Code 1 Code 2
32 17 Remote terminal not equipped with SUB function.
32 18 Remote terminal not equipped with color function.
40 02 Illegal coding system requested.
40 03 Illegal recording width requested.
40 05 ECM requested although not allowed.
40 06 Polled while not ready.
40 07 No document to be sent when polled.
No data in the box number specified for F code
40 08
transmission.
40 10 Nation code or manufacturer code not correct.
Group number not registered for relay broad-casting was
40 11 specified or the number of addressees specified exceeded
the maximum allowable number.
40 12 Retrieval attempted while not ready for retrieval.
Polled by any other manufacturers' terminal while waiting
40 13
for secure polling.
40 14 Common key not registered although it needs to be used.
Black/Red data reception is requested when Black/Red
40 15
receiving function is disabled.
Cipher transmission is requested when Cipher receiving
40 16
function is disabled.
40 17 Invalid resolution selected.
Remote retrieval is requested when the remote retrieval for
40 18
F code is disabled.
Remote registration is requested when the remote
40 19
registration for F code is disabled.
40 20 Invalid full color mode selected.
Vertical resolution capability changed after compensation of
50 01
background color.
74 XX DCN received.
80 01 Fallback impossible.
Unable to detect video signals or commands within six
90 01
seconds after CFR is transmitted.
90 02 Received PPS containing invalid page count or block count.
Error correction sequence not terminated even at final
A0 03
transmission speed after fallback.
A0 11 Receive buffer empty (five-second time-out)
Receive buffer full during operation except receiving into
A0 12
memory.
A0 13 Decoding error continued on 500 lines or more.
A0 14 Decoding error continued for 15 seconds or more.
A0 15 Time-out: 13 seconds or more for one-line transmission.
A0 16 RTC not found or carrier OFF detected for six seconds.
RTC found but no command detected for 60 seconds or
A0 17
more.
A0 19 No image data to be sent.
A0 20 Cannot continue receiving color fax (remaining ink low).
A8 01 RTN, PIN, or ERR received (sending terminal).
A9 01 RTN, PIN, or ERR received (receiving terminal).
Cause
1-21
Refer
to.
4.12.1
4.12.1
4.12.1
4.12.1
4.12.1
4.12.1
4.12.1
4.12.1
4.12.1
4.12.1
4.12.1
4.12.1
4.12.1
4.12.1
4.12.1
4.12.1
4.12.1
4.12.1
4.12.1
4.12.1
4.12.1
4.12.1
4.12.1
4.12.1
4.12.1
4.12.1
4.12.1
4.12.1
4.12.1
4.12.1
4.12.1
4.12.1
4.12.1
4.12.1
4.12.1
4.12.1
Confidential