Brother DCP-1510 Service Manual page 13

POWER CORD SAFETY:
• Use only the power cord supplied with this product.
• DO NOT allow anything to rest on the power cord. DO NOT place this product
where people can walk on the cord.
• DO NOT place this product in a position where the cord is stretched or strain is
otherwise put on the cord. Doing so may cause the cord to become worn or frayed.
• Brother strongly recommends that you DO NOT advise using an extension cord.
• DO NOT put a toner cartridge and drum unit assembly into a fire. It could explode,
resulting in injuries.
• DO NOT use flammable substances, any type of spray, or an organic solvent/liquid
containing alcohol or ammonia to clean the inside or outside of the product. Doing
so could cause a fire or electrical shock. Instead, use only a dry, lint-free cloth.
DO NOT attempt to operate this product with a paper jam or with stray pieces of paper
inside the product. Prolonged contact of the paper with the drum unit could cause a fire.
DO NOT use a vacuum cleaner to clean up scattered toner. Doing this might cause
the toner dust to ignite inside the vacuum cleaner, potentially starting a fire. Please
carefully clean the toner dust with a dry, lint-free soft cloth and dispose of it according
to local regulations.
HOT SURFACE
After you have just used the product, some internal parts of the product will be
extremely hot. Wait at least 15 minutes for the product to cool down before you touch
the internal parts of the product.
x
Confidential