Top Cover Assy - Brother DCP-1510 Service Manual

7.10 Top cover ASSY

(1) Remove the taptite cup B M3x8 screw to remove the top cover lock from the machine.
(2) Open the top cover ASSY.
(3) Bend the boss bushing on the develop joint link inward to remove it from the guide rail on
the top cover ASSY.
(4) Open the top cover ASSY about 30 degrees and remove the boss on the arm side of the
top cover ASSY by pushing it to the direction of the arrow 4a. Slide the top cover ASSY to
the direction of the arrow 4b to remove the boss on the other side, and remove it by pulling
up.
Note:
• Opening top cover ASSY more than 30 degrees could make rib of the top cover
ASSY coming in contact with the fuser unit, resulting in damage.
(5) Remove the paper stopper from the top cover ASSY.
(6) Remove the paper stopper 2 from the top cover ASSY.
Boss bushing
Boss
Guide rail
Develop joint link
Taptite cup B M3x8
Top cover lock
Guide rail
4b
Boss
Fig. 2-29
2-32
Paper stopper
Paper stopper 2
Top cover ASSY
4a
Boss
Arm
Confidential