Packet Tool
This feature is used to capture packets for technician. Integrate packet capture tool
"Wireshark" in TA410/810. Users also could specify the destination IP address and
port to get the packets.
IP
Specify the destination IP address to get the packets.
Port
Specify the destination Port to get the packets.
Port Monitor Tool
This tool is used to debug a FXO port. Select a FXO port and click "Start" to monitor
the FXO port, stop monitoring by clicking "Stop" button.
Figure 13-2 System Logs
Figure 13-3 Packet Tool
Figure 13-4 Port Monitor Tool
TA410/810 User Manual
63/63