Table of Contents
Advertisement
TE200 User Manual
5. System
Click
to access the system page, where you can configure the network
settings, firewall rules and system preferences.
5.1 Network Preferences
5.1.1 LAN Settings
Figure 5-1 LAN Settings
·DHCP
If this option is set as yes, TE200 will act as DHCP client to get an available
IP address from your local network. Not recommended or you cannot access
TE200 without the right IP address.
·Enable SSH
This is the advance way to access the device, you can use the putty software
to access the device. In the SSH access, you can do more advance setting
and debug. It's disabled by default.
16/57
Advertisement
Table of Contents
