SOURce
n
:VOLTage[:LEVel][:IMMediate][:AMPLitude]
Parameters
Comments
Chapter 3
n
SOURce
:VOLTage[:LEVel][:IMMediate][:AMPLitude] <
immediately outputs the voltage set in value at channel n when the output relay is closed.
Parameter
Parameter
Name
n
keyword
SOURce
value
numeric (float 32) or
<
>
discrete
•
In the keyword,
SOURce
1 to 8 for
E1418A, E1418A Option 002
1 to 16 for
E1418A Option 001, E1418A Option 003.
Values of n outside these ranges will generate an error.
•
The
value
parameter is a floating point 32-bit number in the range of -16 Volts
<
>
to +16 Volts.
sets -16 Volts.
MIN
sets +16 Volts.
MAX
sets 0 Volts.
DEF
•
This command immediately programs the specified voltage on channel n. The
output relay for that channel must be closed for the voltage to appear at the output
terminals.
•
This command generates an error if channel n is in the current output mode.
•
Related Commands:
SOURce
n
:VOLTage[:LEVel][:IMMediate][:AMPLitude]?
Type
-16 V to +16 V or
MIN | MAX | DEF
n, the valid range of n is:
n
SOURce
:FUNCtion:MODE VOLTage
HP E1418A SCPI Command Reference
SOURce
value
| MIN | MAX | DEF>
Range of
Values
1 to 8 or 1 to 16
,
,
OUTPut
n
[:STATe]
Default
1
0
90