Table of Contents
Advertisement
DIAGnostic:TRIGgered?
Parameters
Comments
Chapter 3
•
Related Commands:
DIAGnostic:TRIGgered?
of the module.
Returns: unsigned 16-bit integer (uint16).
•
This query returns a 16-bit word indicating the trigger status of each channel.
A bit is set to 0 to indicate the channel is not waiting for a trigger.
–
A bit is set to 1 to indicate the channel is in the wait-for-trigger state.
–
Bits 0–15 correspond to channels 1–16, respectively.
–
•
Related Commands:
SOURce
n
:FUNCtion:MODE
returns a 16-bit word indicating the current trigger status
TRIGger:SOURce
HP E1418A SCPI Command Reference
DIAGnostic
78
Advertisement
Table of Contents
